3M Headlamp Restoration Kit – How To Restore Your Hazy Headlamp Lens
Ask your lights have faded? Not only spoil the look of your car, but reduces the efficiency of lighting that could be dangerous in bad condition, there are three options to replace the solution this.They the lights in the garage for repair or buy lights perfect it 3m Restoration Kit.Please Note – This kit for use OnlyTo plastic lens kit, you must have (or) a battery or electric drill with a speed between 1200 – 1600rpm.If of the drill is faster than 1600RPM and can damage other lens overheating.On hand, if the perforations contains less than 1200rpm, it will not work effectively with this kit process.The: 1 x sandpaper drill with a camera editing of soft X-P500 6 disc grinding wheels P800 x 4 x 1 x 1 x P3000 Trizact foam polishing orange 1 bottle x 1 ml Light Headlight Lens Restoration Kit process Polish3M own lens taped to each site with soap waterUse close to the goal of protection – at least two layers on the edges, because they are damaged when the knife slips Mount Velcro hand drill.Firstly keyboard interface adaptation block of flexible support and a P500 buffer drive interface correction and beginning the objective of ensuring that the mill is in motion which will take place at any time. (Otherwise, the plastic can overheat and burn) If the shoes you need to replace hard drives it.Wipe dust and make sure that the lens is screwed all the hard evenly.Replace P500 P800 with a grid and repeat the process and wiped the dust to make sure you change the disc with a grade.Using sanding.Next Trizact P3000 P800 a vaporizer to moisten the disc and the lens of the fire before grinding and do not let the lens dry spray required.Now P3000 Trizact replace foam polishing discs with a quantity of orange Pad.Add the size of a penny lens.Now French Polish and buff spots on the lens until the fog (you can need to do this several times), remove all masks and polishing of lenses with a micro lens cloth.Your should now be as good as new!